Breeders

Background 7942 views 9 commentsupdate:Aug 24, 2011

Different breeds demand different incubation measures

Commercial broiler strains usually show different performance characteristics. This is not just a matter of growth performance however, but starts at incubation already. Taking tailor made incubation measures in time, will lead to a better start. All breeds are equal, but some are more equal than others…

By Dr. Ron Meijerhof , Poultry Performance Plus, Voorst, the Netherlands
Although it is generally accepted that genetic differences between strains and breeds exist, we often assume that incubation and incubation conditions are more or less equal for all breeds, especially if we look within a specific group like broilers or layers.
There are a lot of similarities among breeds and strains within a breed, but there are some differences as well. Although sound scientific information is limited, practical experiences can give some indications. But to better understand these differences, we will first take a look at the incubation process itself.
What happens in incubation?
Embryos need energy for growing, and that energy is supplied by oxidising the content of the egg. In the first part of the incubation process, the embryo grows on carbohydrates, but in the second part it has to switch to the yolk. This yolk consists mainly of fat, which is a very effective energy source. Utilising this fat for energy is a relatively slow process which requires a lot of oxygen. This means that the ability of the embryo to produce energy is influenced by the availability of oxygen through the shell.
The rate at which the embryo uses energy depends on the temperature in the egg. If this temperature goes up, the embryo will metabolise faster, and therefore will use its energy faster. Of course it is important that the production of energy and the use of energy is in balance. If the embryo uses more energy than it can produce, it will run out of energy at the end of the process, and we can imagine that things will then go wrong.
The running embryo
To try to imagine what happens in incubation, we can compare it with endurance sports like running a marathon. Of course the development of an embryo and running a marathon are not the same, but there are some similarities. Although running a marathon is a very stressful process, walking a marathon at a speed of 5 km/hr is in reach of everybody with a good physical condition and sufficient motivation.
However, if we want to run a marathon at 12 km/hr, we need to do a lot of training, and only a few people can run a marathon at 20 km/hr. So it’s not the distance that makes the difference, it’s the speed. In fact, almost everybody has enough energy stored in their body to run a marathon, as running 42 km requires the energy that is delivered by burning approximately 400 g of body fat. But we need to metabolise this fat into nutrients that can be used by the muscles, which requires oxygen and takes time.
That is why training programmes focus on the ability of the body to uptake oxygen. If we do not run but walk, the body has enough time and oxygen to convert that fat in time, and we have no problem. However, if we run at high speed, the use of energy is much higher, and the body cannot keep up with the demand. If we try to run in an environment short of oxygen, for instance at high altitude, this will even be worse.
Differences among breeds
Not all breeds and lines are equal. If we incubate for example Ross 308 and Cobb 500 eggs of the same weight in the same machine, we can observe some differences. We will find for instance that the Ross 308 will approximately lose 0.5 to 1% more weight (moisture) in 18 days.
 If we take egg shell temperatures (embryo temperatures) at 18 days of incubation, we will see that Cobb eggs will be 0,7 to 1,0ºF warmer than Ross eggs. If we look at the hatch time, we normally see that Cobb eggs will hatch 8 to 12 hours earlier than Ross eggs of the same weight.
 
What are the consequences?
If we try to compare this with our running chicks, how can we explain this? Cobb embryos seem to have a higher internal temperature than Ross. The likely reason for this is that Cobb embryos produce slightly more heat during incubation than Ross, and as the eggs are in the same machine at the same air temperature, their resulting embryo temperature will be higher. It is as if the embryo is running at a higher speed, which also explains why it hatches earlier.
At the same time, the Cobb eggs lose less moisture. This will be partly the result of the higher temperature of the eggs, but it indicates that also the conductance of the eggs is less. A lower conductance does not only mean that moisture passes more slowly, also gas exchange and therefore oxygen uptake and carbon dioxide release will be more difficult.
Two options possible
If we put this all together, it means that the Cobb embryo is able to run faster, but at the same time has less oxygen available. As a result it will hatch earlier, but it will run out of energy more quickly. As the embryo needs energy to survive and has no opportunity to burn more fat, two things will happen:
1) The embryo will start to burn protein. This means that it will take energy from its muscles, resulting in lower muscle weight and development at hatch. Especially the heart muscle seems to be affected, creating problems later in life.
2) The embryo will switch more or less to anaerobic oxidation of carbohydrates, resulting in the production of lactic acid, the same product that makes our muscles hurt the day after we did excessive exercise without proper training. These birds will have a problem to move on the belt and tray in the hatchery, and also in the farm, resulting in a poor start.
But not only protein sources like the heart muscle are sacrificed in this process, also the immune system is affected, and will not function as well as it is able to.
How to manage this situation?
What we have to realise is that there is a difference between breeds. In this case of Cobb and Ross, there is a difference in shell conductance and heat production. Issues like differences in hatch time, more exhausted, poor starting birds with damaged hearts and immune systems are in most cases not genetic, but are the result of the fact that we didn’t force the embryos to walk the marathon instead of running it. How do we let the embryos walk the marathon? Just by controlling its temperature to the right level of approximately 100ºF (egg shell temperature). This means that the temperature of the machine needs to be adjusted to the breed which we are incubating, but also for instance to the egg sizes in the machine, as bigger eggs will give higher heat production and lower air velocity, resulting in higher embryo temperatures.
Adjusting to breed
If we do not adjust our temperatures to the right level, we will see differences between breeds. The higher heat producing breeds like Cobb compared to Ross, but also Cobb 700 compared to Cobb 500 and Ross 708 compared to Ross 308 will suffer more from overheating in the same temperature environment.
It will result in a too quick hatch (with all the problems of dehydration, etc. associated), more exhausted chicks and therefore a poor start, more leg problems due to the breakdown of the protein, more metabolic problems like ascites because of the damage on the muscles, and possibly more disease problems due to a less developed immune system. Not all of these problems will be very severe, depending on the level of temperature and oxygen supply we can implement, but a too high temperature will have these negative effects.
If we are not able to control the temperature based on the demands of breed and strain, we will especially hurt the embryos that tend to produce more heat during incubation. As it seems that with increasing improvements in genetics the heat production over the years is slowly increasing, this will become more and more important in the future, and with it the need to control incubation conditions and then especially embryo temperature to the level desired by the developing embryo.
MORE INFORMATION
 
 
 
 

Dr. Ron Meijerhof

9 comments

  • no-profile-image

    Ken Marshall. poultryconsultant.com

    A very interesting and informatie article with lots of digestion required. I would be interested to hear any comments from the two main breeders!

  • no-profile-image

    German Mercado

    very clear and informative article.I wonder how apply to leghorn eggs? thanks.

  • no-profile-image

    Habib-ur-Rehman

    This is very informative article. Does the author have the data about Hubbard and Arbor Acre. He doesn't mention the machine either it is multistage or single stage from where he collected the data.

  • no-profile-image

    Ron Meijerhof

    I am afraid there is not a lot of real "sound", scientifically produced information about strains like Hubbard and Arbor Acres. What I know from my (limited) experience with Hubbard and Arbor Acres is that the AA can be compared with Ross 308, where for instance the former Hubbard HY is much more like Cobb 500. I do not have enough experience with the Hubbard flex to be able to tell for sure, although they seem to produce not that much heat. But the simplest thing to do is (if practical situation allow) to compare eggs from different strains (and more or less identical age or egg weight) in the same machine, and simply follow egg shell temperature differences.
    About single stage or multi stage, in a way the difference is regardless of the type of incubation, as it is related to the internal heat production of the embryo. However, it means that some types of incubation will cause more problems with certain breeds than with others.
    about leghorn eggs, they do not produce a lot of heat but on the other hand are more sensitive for overheating than broiler way, in such a way that if you are too warm, the chicks will show very quickly with poor development.
    I hope this makes it more clear.

  • no-profile-image

    Bruno H. R. Dias

    It is absolutely good read an article about this at this time, my question is what is the best method to measure the egg shell temperature in the machine and is it necessary to separate eggs,or to put the eggs of different strains in different hachter and incubator?

  • no-profile-image

    Ron Meijerhof

    there are different ways of doing it, but the most common and most practical way is to use a (Braun) infrared ear thermometer that is used for measuring fever with kids. Allow the device to get on temperature to avoid condensation, make sure the plastic cap is not broken, and measure egg shells at the thickest point, so not at the top or bottom, to avoid measuring albumen or aircell instead of the embryo. Aim for 100 to 100.5oF, max 101, for all eggs, all breeds and all moments, except for the end of the incubation process in the hathcer, when internal pipping occurs. The activity of the embryo will increase the embryo temperature, and that should be to allow them to get enough energy to hatch. Just take a small sample of eggs to get a good idea of the embryo temperature at the desired spots, 5 or max 10 eggs, and leave them as much as possible in their original positions as temperatures change rapidly. So dont take them out of the machines to measure.
    About combining sets of eggs, try to get egg groups together that are more or less equal in heat production. So if two breeds need to be placed in the same machine, try to put eggs from young flocks from the high heat production strains together with old flocks from the low heat production strains, and not the other way around. So for example, old Ross flocks together with young Cobb flocks, but not vice versa.

  • RATHINAM G K G K

    Thanks for the useful information related to incubation conditions. We in India, had very different practical experience, which didn't match with the author's views. I would like to know whether he is talking about single-stage or multi-stage incubators?.

  • rahim javadi

    hello
    please send ross308 eggs hatching time flock age 34 week ?thanks

  • rahim javadi

    diagonesis ross 308 chick s-----cobb ---in one day chick price change thanks

Load more comments (5)

Or register to be able to comment.